dropbear anleitung?

      bekomms irgendwie nicht hin
      beim login kommt das

      Quellcode

      1. login as: maniac
      2. Authenticating with public key "meine"
      3. Passphrase for key "meine":
      5. BusyBox vv1.9.1 (2016-03-02 16:48:43 CST) built-in shell (ash)
      6. Enter 'help' for a list of built-in commands.
      8. mount: mounting /proc on /proc failed: Device or resource busy
      9. mount: mounting none on /proc/bus/usb failed: Device or resource busy
      10. rootdir=/
      11. table='/etc/devicetable'
      12. no config jffs2 block detected
      13. no configback jffs2 block detected
      14. mount lte jffs2 success
      15. Loading drivers and kernel modules...
      16. insmod: cannot insert '/lib/extra/pcmshim.ko': File exists
      17. sh: can't open /opt/bin/bootstrap
      18. Start mic now ...
      19. GlobeMac Init OK
      20. done sync
      21. load cfm ok.
      22. PPPPPPPPPPPPPPP 0
      23. ##sendmsg return 16, errno 0.
      24. INSMOD START......
      25. insmod: cannot insert '/lib/extra/bcm_ingqos.ko': File exists
      26. insmod: cannot insert '/lib/extra/bcm_bpm.ko': File exists
      27. insmod: cannot insert '/lib/extra/pktflow.ko': File exists
      28. insmod: cannot insert '/lib/extra/bcmfap.ko': File exists
      29. insmod: cannot insert '/lib/extra/bcmxtmcfg.ko': File exists
      30. insmod: cannot insert '/lib/extra/adsldd.ko': File exists
      31. insmod: cannot insert '/lib/extra/bcm_enet.ko': File exists
      32. insmod: cannot insert '/lib/extra/nciTMSkmod.ko': File exists
      33. insmod: cannot insert '/lib/extra/wl.ko': File exists
      34. insmod: cannot insert '/lib/kernel/drivers/usb/storage/usb-storage.ko': File exists
      35. insmod: cannot insert '/lib/kernel/drivers/usb/class/usblp.ko': File exists
      36. insmod: cannot insert '/lib/extra/bcmvlan.ko': File exists
      37. insmod: cannot insert '/lib/extra/pwrmngtd.ko': File exists
      38. INSMOD Done
      39. insmod: cannot insert '/lib/extra/endpointdd.ko': File exists
      40. pid 405's current affinity mask: 1
      41. pid 405's new affinity mask: 1
      42. ethcmdVportEnable--------SUPPORT_ATP_ETH_BCM_EXT_SWITCH_53125-----
      43. ARL table flush done
      44. Success